BeamBar is designed to either augment an existing laser show alongside traditional laser projectors, adding that special eye-candy. BeamBar can be controlled through DMX or runs in stand-alone or music mode. Each laser beam can be individually aligned through a 4-point alignment system. The BeamBar is a great effect for stages, live gigs and nightclubs, as well as for TV Shows and show productions.
This special laser effect creates fans of laser beams and can be controlled through DMX or runs in stand-alone or music mode.
The Laserworld BeamBar 10R MK3 is a bar with 10 single beam laser outlets, each equipped with a red laser diode (the bright and good visible red!), which means 10 x 120 mW / 638 nm.
Each laser beam can be individually aligned through a 4-point alignment system, that can easily be accessed from the front - so no opening of the housing is necessary.This show laser light provides an analog modulation. It means a better colour fading and a much broader colour hue. These facts make the Laserworld BeamBar devices ideal for all applications requiring many different colour hues and colour fadings.
The Laserworld BeamBar 10R MK3 can be controlled through 13 DMX channels, so each diode can be controlled individually. Thus it's possible to create many different chaser, beam or fan effects.
Due to the standard DMX compatibility, the Laserworld BeamBar 10R MK3 can easily be integrated into an existing lighting setup.
This laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.
The Laserworld BeamBar 10R MK3 is a great effect for stages, live gigs and nightclubs, as well as for TV Shows and show productions.
Due to Advanced Optical Correction technology used in LASERWORLD, laser systems the optical power of each colour within installed laser module(s) may slightly differ from the specification of respective laser module(s), Divergence FWHM average depending on model.
WARNING- This product is designed to be used by Responsible Persons
Class 3B lasers may have sufficient power to cause an eye injury, both from the direct beam and from reflections.
Do not point this product directly towards persons or audiences, the user is responsible for the legal requirements when using this product.
Laserworld BeamBar 10R MK3
- 1'200 mW guaranteed total output power
- 10 red diode modules
- Easy laser alignment via the front plate
- Brightness control - analog modulation
- DMX programmable
- Automatic, stand-alone, and master-slave modes
- Guaranteed Power at aperture: 1'200 mW
- Power Red: 10 x 120 mW / 638 nm
- Beam Specifications*: ca. 3.0 mm / 1.1 mrad
- Laser Source: Diode
- Laser Class: 3B
- Operation Modes: DMX, stand-alone, sound-to-light, master-slave
- Accessories:; Interlock connector, manual, key
- IP rating: IP4X
- Power Supply: 85 V - 250 V / AC, 50/60 Hz
- Power Consumption: 50 W
- Dimensions: 1000 x 160 x 80 mm
- Weight: 9.0 kg
- EAN / MPN: 7640144994822